# Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#  Copyright (C) 2002  Stanislav Sinyagin
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program; if not, write to the Free Software
#  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.

# $Id: Makefile.in,v 1.1 2010-12-27 00:04:31 ivan Exp $
# Stanislav Sinyagin <ssinyagin@yahoo.com>
#

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = doc
DIST_COMMON = $(dist_devdoc_DATA) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-exec-recursive install-info-recursive \
	install-recursive installcheck-recursive installdirs-recursive \
	pdf-recursive ps-recursive uninstall-info-recursive \
	uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(devdocdir)" "$(DESTDIR)$(pkgdocdir)"
dist_devdocDATA_INSTALL = $(INSTALL_DATA)
nodist_pkgdocDATA_INSTALL = $(INSTALL_DATA)
DATA = $(dist_devdoc_DATA) $(nodist_pkgdoc_DATA)
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
FIND = @FIND@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KILL = @KILL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PERLINC = @PERLINC@
POD2MAN = @POD2MAN@
POD2MAN_PRESENT_FALSE = @POD2MAN_PRESENT_FALSE@
POD2MAN_PRESENT_TRUE = @POD2MAN_PRESENT_TRUE@
POD2TEXT = @POD2TEXT@
POD2TEXT_PRESENT_FALSE = @POD2TEXT_PRESENT_FALSE@
POD2TEXT_PRESENT_TRUE = @POD2TEXT_PRESENT_TRUE@
RM = @RM@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SLEEP = @SLEEP@
STRIP = @STRIP@
SU = @SU@
VERSION = @VERSION@
ac_ct_STRIP = @ac_ct_STRIP@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
cachedir = @cachedir@
cfgdefdir = @cfgdefdir@
datadir = @datadir@
dbhome = @dbhome@
defrrddir = @defrrddir@
distxmldir = @distxmldir@
enable_pkgonly = @enable_pkgonly@
enable_varperm = @enable_varperm@
exec_prefix = @exec_prefix@
exmpdir = @exmpdir@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
logdir = @logdir@
mandir = @mandir@
mansec_misc = @mansec_misc@
mansec_usercmd = @mansec_usercmd@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
perlithreads = @perlithreads@
perllibdir = @perllibdir@
perllibdirs = @perllibdirs@
piddir = @piddir@
pkgbindir = @pkgbindir@
pkgdocdir = @pkgdocdir@
pkghome = @pkghome@
plugdevdisccfgdir = @plugdevdisccfgdir@
pluginsdir = @pluginsdir@
plugtorruscfgdir = @plugtorruscfgdir@
plugwrapperdir = @plugwrapperdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
reportsdir = @reportsdir@
sbindir = @sbindir@
scriptsdir = @scriptsdir@
seslockdir = @seslockdir@
sesstordir = @sesstordir@
sharedstatedir = @sharedstatedir@
siteconfdir = @siteconfdir@
sitedir = @sitedir@
sitexmldir = @sitexmldir@
supdir = @supdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
tmpldir = @tmpldir@
tmpluserdir = @tmpluserdir@
torrus_user = @torrus_user@
var_group = @var_group@
var_mode = @var_mode@
var_user = @var_user@
varprefix = @varprefix@
webplaindir = @webplaindir@
webscriptsdir = @webscriptsdir@
wrapperdir = @wrapperdir@
SUBDIRS = . manpages
SUBST = @abs_top_builddir@/setup_tools/substvars.sh
CLEANFILES = $(POD_FILES) $(nodist_pkgdoc_DATA)
EXTRA_DIST = $(SRCPOD)
SRCPOD = \
		install.pod.in \
		nodeid_usage.pod.in \
		reporting_setup.pod.in \
		rpnexpr.pod.in \
		rrfw_torrus_migration.pod.in \
		scalability.pod.in \
		snmpdiscovery.pod.in \
		stylingprofile.pod.in \
		userguide.pod.in \
		vendorsupport.pod.in \
		webintf.pod.in \
		xmlconfig.pod.in

POD_FILES = \
		install.pod \
		nodeid_usage.pod \
		reporting_setup.pod \
		rpnexpr.pod \
		rrfw_torrus_migration.pod \
		scalability.pod \
		snmpdiscovery.pod \
		stylingprofile.pod \
		userguide.pod \
		vendorsupport.pod \
		webintf.pod \
		xmlconfig.pod

@POD2TEXT_PRESENT_TRUE@nodist_pkgdoc_DATA = \
@POD2TEXT_PRESENT_TRUE@		install.txt \
@POD2TEXT_PRESENT_TRUE@		nodeid_usage.txt \
@POD2TEXT_PRESENT_TRUE@		reporting_setup.txt \
@POD2TEXT_PRESENT_TRUE@		rpnexpr.txt \
@POD2TEXT_PRESENT_TRUE@		rrfw_torrus_migration.txt \
@POD2TEXT_PRESENT_TRUE@		scalability.txt \
@POD2TEXT_PRESENT_TRUE@		snmpdiscovery.txt \
@POD2TEXT_PRESENT_TRUE@		stylingprofile.txt \
@POD2TEXT_PRESENT_TRUE@		userguide.txt \
@POD2TEXT_PRESENT_TRUE@		vendorsupport.txt \
@POD2TEXT_PRESENT_TRUE@		webintf.txt \
@POD2TEXT_PRESENT_TRUE@		xmlconfig.txt

devdocdir = $(pkgdocdir)/devdoc
dist_devdoc_DATA = \
		devdoc/architecture.pod \
		devdoc/devdiscover.pod \
		devdoc/progstyle.pod \
		devdoc/reqs.0.0.pod \
		devdoc/reqs.0.1.pod \
		devdoc/torrus_roadmap.pod \
		devdoc/wd.distributed.pod \
		devdoc/wd.messaging.pod \
		devdoc/wd.monitor-escalation.pod \
		devdoc/wd.uptime-mon.pod

SUFFIXES = .pod.in .pod .txt
all: all-recursive

.SUFFIXES:
.SUFFIXES: .pod.in .pod .txt
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
uninstall-info-am:
install-dist_devdocDATA: $(dist_devdoc_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(devdocdir)" || $(mkdir_p) "$(DESTDIR)$(devdocdir)"
	@list='$(dist_devdoc_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(dist_devdocDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(devdocdir)/$$f'"; \
	  $(dist_devdocDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(devdocdir)/$$f"; \
	done

uninstall-dist_devdocDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_devdoc_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(devdocdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(devdocdir)/$$f"; \
	done
install-nodist_pkgdocDATA: $(nodist_pkgdoc_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(pkgdocdir)" || $(mkdir_p) "$(DESTDIR)$(pkgdocdir)"
	@list='$(nodist_pkgdoc_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(nodist_pkgdocDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgdocdir)/$$f'"; \
	  $(nodist_pkgdocDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgdocdir)/$$f"; \
	done

uninstall-nodist_pkgdocDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_pkgdoc_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pkgdocdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pkgdocdir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	$(mkdir_p) $(distdir)/devdoc
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(mkdir_p) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(devdocdir)" "$(DESTDIR)$(pkgdocdir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-dist_devdocDATA install-nodist_pkgdocDATA

install-exec-am:

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-dist_devdocDATA uninstall-info-am \
	uninstall-nodist_pkgdocDATA

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
	clean clean-generic clean-recursive ctags ctags-recursive \
	distclean distclean-generic distclean-recursive distclean-tags \
	distdir dvi dvi-am html html-am info info-am install \
	install-am install-data install-data-am \
	install-dist_devdocDATA install-exec install-exec-am \
	install-info install-info-am install-man \
	install-nodist_pkgdocDATA install-strip installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic maintainer-clean-recursive \
	mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
	pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
	uninstall-dist_devdocDATA uninstall-info-am \
	uninstall-nodist_pkgdocDATA


.PRECIOUS: $(POD_FILES)

.pod.in.pod:
	$(SUBST) $<  > $@

@POD2TEXT_PRESENT_TRUE@.pod.txt:
@POD2TEXT_PRESENT_TRUE@	$(POD2TEXT) $< > $@ 

htdocs: $(POD_FILES)
	cd manpages; make pods
	HTMLDIR=@abs_top_builddir@/../htdocs $(SHELL) mkhtdocs.sh
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
